Flat & Low-Slope Roofs in Tallahassee, FL

Materials

Modified bitumen, TPO and other single-ply membranes are common on low-slope roofs. The right choice depends on the building and how it drains.

Ponding water

Water that sits on a flat roof for days after rain speeds up wear and finds any weak seam. Drains and scuppers must stay clear.

Heat

Strong sun ages membranes. Reflective surfaces help keep the building below cooler.

Seams and edges

Most leaks start at seams, edges and where the flat roof meets a wall. These need careful flashing.

Debris

Leaves and needles clog drains quickly under trees. Clear them regularly, especially before storm season.

Porches and additions

Where a low-slope porch roof meets the main roof is a common leak point. Have it checked if you see stains near that wall.

Repair or replace

Blisters, cracks and repeated leaks across the surface usually mean replacement is near.

Get help

Tell the roofer the roof's size and what you're seeing. Send a request and a roofer will get in touch.

Coatings

Reflective coatings can extend the life of some low-slope roofs and reduce heat. A roofer can tell you whether your roof is a good candidate.

Regular checks

Look at flat roofs twice a year and after big storms. Small cracks and lifted seams are cheap to fix early and expensive once water gets under the membrane.

Drains and scuppers

Keep drains, scuppers and the gutters they feed clear of leaves. On a flat roof, one blocked drain can leave a large pond after a summer downpour.